| Customization: | Available |
|---|---|
| Certification: | CE |
| Processing Speed: | 0.5-7m/Min |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Machine Description:
The front and rear beams of the machine adopt high-strength steel box structure. The right side of the beam is a circular track. The rails on both sides and round end of the beam are embedded with quenched super hard steel guide rails, which is more than ten times the service cycle of ordinary guide rails. The machine adopts chainless ball bearing transmission to change the sliding contact between the bearing and the guide rail into rolling contact, reduce the tension and drive smoothly. The main drive adopts variable frequency speed regulation motor and hardened gear reducer combined with RV Reducer to ensure higher transmission efficiency, greater transmission torque force, no shaking at low speed, large speed regulation range, convenient and reliable operation. This machine adopts PLC control, Touch Screen display processed thickness, working speed and processed meters, reliable control, adjust conveniently. In addition, it has good protection system, reasonable lubricating system and perfect appearance.
Main technical data:
| Min.Glass size | 30×30mm |
| Glass thickness | 3-50mm |
| Transmission speed | 0.5-7m/min |
| Max.hemline grinding | 5mm |
| Arris grinding range | 0.5-5mm |
| Power | 28KW |
| Weight | 6300kg |
|
|
| The base, which weighs about 1600 kg adopts two times annealing treatment to ensure no deformation. First time rough machined and then well machined. It has high datum accuracy and can maintain the stability of the machine body when processing heavy glass | The guide rail is quenched and heat treated with 40 steel material to obtain high hardness, wear resistance and long service life. The thickness of guide rod support base reaches 25mm, and the support strength is higher and more stable. The front and rear beams are made of 35mm steel plate. After the first annealing treatment, the second annealing after rough machining, and then finishing, the internal stress is eliminated to ensure no deformation and better overall stability. |
|
|
| Adopt two big 110 RV Gear reducer to make the machine run more stable with bigger power, and durable. | Adopt the frequency inverter motor and Hard-tooth reducer to ensure keeps the machine more stable while processing the heavy and overload size glass. The motor is 410mm length, 260mm width. |
|
|
| All Spindles are use the stronger motor, more durable and reliable for use. Keep improving the motor technology to ensure the motor quality. | Adopt special bearing base and install taper adjusting bearing; it will be more durable and reliable for use. High transmission accuracy. |
|
|
| The link shaft and the link buckle are made of 40 CR material, with strong rigidity and no deformation. The cross positioning of guide bearing and load bearing to ensures high accuracy and stable transmission. And the link shaft is processed with the guide oil groove to make the lubrication in place. | Better lubricating system, The Automatic lubrication pump for distributing the oil to the bearing of pads with the pipe, the oil pipe would be touch to the bearing ensure lubricate to each bearing. And the manual oil pumps for distributing the oil to the motor slider, which have long service life and durable. |
|
|
| Adopt the Schneider electric with neat line layout which make the machine more safety and running smoothly. | Adopt INOVANCE PLC and CMGC touch screen to show glass thickness, speed and more information which is easy for operation. |
|
|
| Adopt the high-quality timing belt with 2PU to convey the glass, which has longer service life and more accurate. | It has the safety system in the entry&exit end, when the hand touches this steel plate, it will automatically close and then the machine will be stop running, we call this is Anti-pinch hand clamping device. |
|
|
| Entrance conveyor is equipped with a vertical adjustment and LED display for glass removal system, for this reason it is not necessary to adjust the position of wheels, acting instead on the handwheel placed beneath the conveyor. | There has the water tray under the loading/unloading table, on top of the gearbox at the exit, so that the water won't be directly to the floor and to the machine. |
|
|
| Adopt perfect waterproof system with 02 layers brushes onto the water tank. | Adopt perfect Interactive waterproof system with 03 layers brushes to protect the bearing far from water and not moisture, easy to disassemble and replace. |
| Adopt of quality stainless steel and bigger recycling water tank which is corrosion resistant and more durable. The size is 1500*800*300mm. | With PVC drainage pipe, which has long life, smooth drainage, easy maintenance and better looking. |
| Mini-washer is equipped on the front& back beam to keep the tracks (rubber pads) clean to avoid incrustations and facilitate glass cleaning at the end of processing. |
){kind=link}